BIG ASS FANS Pivot 180, Installation Manual

Page: 41 / 60

PIVOT™ 180
35
WWW.BIGASSFANS.COM ©2011 DELTA T CORP. ALL RIGHTS RESERVED
PIVOT™ 180
U2
V2
W
2
U5
V5
W
5
U1
V1
W
1
1
2
3
Wiring the fan motor and oscillator motor
CAUTION: To ensure obstructions do not interfere with the fan’s movement, carefully test the fan in full oscillation before
usage.
Using customer-supplied cable, wire the fan motor as shown on the following page. Big Ass Fans provides 44” (0.91 m) of cable to
connect the junction box to the fan motor.
The oscillator motor is prewired to a junction box located on the lower surface of the oscillator arm. Refer to the wiring diagram below.
Pivot 180 W
iring
Electrical Installation (cont.)
Cable to Fan Controller (Customer-Supplied)
New High Flex Cable
(BAF-Supplied)