OPERATION MANUAL
1 Safety instructions
ATTENTION!
To avoid contact with electricity, injuries and the
danger of fire, the following safety instructions must be followed
at all times. The instructions have to be read before using the
machine and have to be stored in a safe place.
1. SAFETY INSTALLATIONS
: Check the efficiency of all safety
installations regularly. Do not change or remove the safety instal-
lations. Defective safety installations or damaged parts have to
be replaced by trained personnel.
2. WORK CLOTHES
: Wear suitable work clothes: no loose gar-
ments or clothes with long sleeves, ties etc.
3. AVOID UNSECURE POSITIONS
: Take up a secure position,
in which you can be balanced at all times.
4. NEAT WORKPLACE:
Untidiness in the workplace increases
the risk of accident.
5. CARRY OUT YOUR WORK ATTENTIVELY
: Do not let your-
self be distracted from work. A distraction can cause accidents.
6. ROOM CONDITIONS
: Do not expose the machine to rain. Do
not use the machine in damp or wet rooms. Ensure lighting is
good. Do not use the machine close to flammable liquids or gas.
7. HAVE THE MACHINE REPAIRED BY PROFESSIONEL
PERSONNEL ONLY
: When buying machines comply with the
effective saftey regulations. Repairs may only be carried out by
professionel personnel.
8. KEEP CHILDREN OUT OF REACH OF THE MACHINE
: The
machine or the cables should not be touched by third parties,
especially children.
9. TAKE CARE OF THE POWER CABLE
: Do not pull the power
cable to remove the plug from the socket. Protect the cables from
high temperatures, oil and sharp edges. Check all cables and
plugs regularly. In case of damage have them replaced by quali-
fied personnel. Check extensions regularly and replace them if
damaged.
10. ELECTRIC SUPPLY CABLES:
Take care that the electric
supply cables are not damaged by the laminator wheels running
over them, or catching them. Make sure that they are not a trip-
ping hazard.
Manual
Roll
Lam 120W;
Roll
Lam 140W;
Roll
Lam 160W 5
