OPERATION MANUAL
Manual
Roll
Lam 120W;
Roll
Lam 140W;
Roll
Lam 160W 10
Picture 4
Control panel
4.3 Control panel
1 Control lamp for cold operation
2 Control lamp for warm operation
3 Temperature control lamp
4 Temperature display
5 Temperature regulator
6 Speed regulator
7 Continuous operation/Foot operation switch
8 Forward/Reverse operation switch
9 Cold/Warm operation switch
Preparations
1. Make sure that the emergency stop switches are switched off.
2. Switch off the speed regulator (6).
3. Switch on the main switch (17).
4. Adjust the requested temperature and wait until the control
lamp (3) starts to light.
5.
Operation with the foot switch
: When selecting switch (7) to
“Step“ the roller is driven by foot switch. By activating the foot
switch the drive roller starts to move. When taking the foot off
the foot switch the drive roller stops. The speed can be adjust-
ed with the speed regulator (6).
ATTENTION: When working with the foot switch the safety
light barrier which is integrated in the machine becomes
non-operational!
