BH FITNESS SK-9000, Owner'S Manual, Page: 18 / 43

BH Fitness SK9000B
Page 17
CONSOLE OPERATION
OPERATING INSTRUCTIONS
STARTING THE UNIT
To turn on the monitor, plug the unit in or pedal the unit.
•
Plug the 15V adapter (N) that is supplied with the unit into a wall outlet, and select the ON
option in the personalized settings (step 4 POWER).
•
Or pedal (spin) the crank at 45 rpm. As soon as it reaches 45 rpm the monitor will come on
and remain on for 60 seconds so that it can be programmed.
Once the monitor is on it will display the profile and the letter “M” for manual on the LED array
( A ) Figure 21, and the “WELCOME TO HI – POWER” message on the bottom alphanumeric
screen ( B ).
You can start the program in manual mode by pressing the QUICK / START key and by
pressing the level
▲▼ keys you can increase or decrease the exertion levels.
STARTING THE FAN
The monitor on this machine is fitted with an air vent (D), Figure 20, through which a FAN
provides two air speeds, LOW and HIGH. To switch the fan on while exercising press the ON /
OFF key on the keypad, Figure 22, and the fan will start. Whenever the monitor is switched to
PAUSE the fan will switch off.
SLEEP MODE
If the 15V adapter (N) is connected to the unit then the console will not switch over to sleep
mode when the POWER option under personalization mode is switched ON.
If the 15V adapter (N) is not connected, the console will switch over to sleep mode even when
the POWER option is switched ON.
This mode is activated if an RPM signal is not received within 45 seconds when in stand-by
mode. Windows are not displayed while in this mode. You have to step on the footplate to
produce a signal and reopen the display window.