![background image](http://html1.mh-extra.com/html/bh-fitness/sk-9000/sk-9000_owners-manual_2747810016.webp)
BH Fitness SK9000B
Page 15
CONSOLE OPERATION
WATTS:
This shows the amount of energy currently being produced during the exercise. This
calculation is based on the exertion level at which the user is working and the pedaling rate.
The information is displayed in Watts.
PULSE:
This shows the user’s heart rate recorded through the handlebar pulse sensors or a
telemetric chest belt such as the
POLAR T41 transmitter
.
KEYPAD
The function of each key is listed below. See Figure 22.
The electronic monitor includes an easy-to-use keypad. This keypad consists of Fan keys ( E ),
numeric keys ( F ) and function keys ( G ).
Fan keys
( E ) –
Off / On; Low
(minimum speed);
High
(maximum speed).
Numeric keys
(F) - (1- 0) are used to enter the data requested by the monitor.
Function keys
( G ) -
reset; level
▲
; level
▼
; enter ; pause ; stop ; quick / start
- are used
to select a particular exercise, enter requested data, control exercise exertion levels and to
finish the exercise.
RESET
- Reset key. This is used to erase the data that have been entered into the monitor
when selecting a program.
LEVEL
▼
- Key for decreasing exertion level. When pressed during exercise, this key will
decrease the exertion level by one machine setting. During the selection of pre-programmed
profiles, it is used to move on to the next profile screen.
LEVEL
▲
-Key for increasing exertion levels. When pressed during exercise, this key will
increase the exertion level by one machine setting. During the selection of pre-programmed
profiles, it is used to move back to the previous profile screen.
ENTER
- Selection and validation key. This is used during pre-programmed profile selection to
select a profile, confirm data that have been entered and to start the exercise. It is also used
during user profile programming to confirm the exertion level settings for each minute.
PAUSE
- Pause key. If this is pressed during a session, the exercise is interrupted and the
exercise timekeeper (clock) is halted. To restart the exercise timekeeper (clock) press the
pause key again or continue exercising. Pause will only last for 45 seconds, then the exercise
will stop and the monitor will exit the exercise.
If, the STOP key is pressed, in pause mode, then the exercise will finish.
Summary of Contents for SK-9000
