BH FITNESS SK-9000, Owner'S Manual, Page: 15 / 43

BH Fitness SK9000B
Page 14
CONSOLE OPERATION
ELEMENTS OF THE ELECTRONIC MONITOR (Figure 20)
The electronic monitor is made up of two distinct areas:
The top area,
Figure 21 (A – B – C) for the DISPLAY
The bottom area, Figure 22 (E – F – G) for the KEYPAD
DISPLAY
This area is comprised of two screens.
(A) The top LED array displays real-time exertion levels being produced during the selected
program.
(B) Bottom alphanumeric screen, which guides the user selection options and exercise.
The top screen (A) displays the various pre-programmed exercise profiles (programs) that can
be selected and, during exercise, current exertion levels.
The bottom alphanumeric screen (B) is used to guide the user when selecting the exercise to
do, as well as displaying information about the exercise both during and after the session. The
LED indicators (C) located below the alphanumeric screen give a simultaneous readout of
SPEED, RPM; TIME, DISTANCE; CALORIES, WATTS; PULSE and indicate which information
is being displayed throughout the exercise.
The data that are displayed on the LEDs (C) during exercise are as follows:
SPEED: This shows an estimated value of the linear velocity at which a bicycle will travel
based on the user’s pedaling rate.
RPM: (Revolutions Per Minute) This shows the current pedalling rate during exercise. It
indicates the number of full turns that the crank makes in one minute.
TIME: This shows the time that has elapsed since you started the exercise or, if a time limit
has been established, the amount of time left before the exercise finishes. The time is
displayed in minutes and seconds (mm:ss).
DISTANCE: This shows the distance that you have travelled since beginning the exercise. The
distance is calculated by using the estimated linear speed.
CALORIES: This shows the estimated number of calories that have been burned off up until
now. This calculation is based on the energy being produced and the weight and age values
provided by the user.