BGS technic 2170, Instruction Manual

Page: 19 / 33

BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
3
2
SAFETY INSTRUCTIONS
2.1 GENERAL RULES WHEN USING
Symbols shown in this Manual warn and identify potential hazards when handling the device.
- Do not leave the device unattended while it is turned on. Always deactivate item with the master
switch when not using it for heating!
- Make sure that the power supply unit has sufficient air supply for cooling
- Make sure that the ventilation openings are clean and free of dust and dirt, to not preclude flow of
cooling air.
- Do not attempt to repair the device. The device contains no user-reparable components.
- The user is responsible for the system installation and use in accordance with instructions shown
in this Manual. The supplier is not liable for any damage due to inexpert use and operation.
- Only persons older than 15 years , properly trained and with adequate qualification can operate
the equipment. Do not use the equipment when under the influence of drugs, alcohol or
medication.
- Keep persons standing around and animals at a safe distance while working with the device,
including while the heated material is cooling down.
- Avoid working in rain, water and humid environments. Keep the working area well ventilated and
dry, clean and well lit.
SYMBOL EXPLANATION
DANGER! Denotes a dangerous situation that will result in a death or serious injury.
The potential risks are shown under the following symbols, or explained in the text.
Before plugging in the device, make sure the socket voltage matches that on the
product plate. If the socket voltage does not match that shown on the type plate, it can
result in a serious hazard and damage to the device.
IMPORTANT! Read this Manual carefully to gain information about the device
features. Inappropriate handling may cause injuries to persons and damage to the
device.
NOTICE: This equipment is not designed for use in residential environments and may not provide
adequate predection of radio reception in such environments.