BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Tel.: 02196 720480
Fax.: 02196 7204820
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
5
2.3.2 CAUTION! HOT SURFACE
CAUTION! Do not touch any objects located near the induction heater unless
you have checked that it has cooled down.
Do not touch the induction coil if it is activated and the strong magnetic field
and heating are turned on.
ALWAYS wear predective gloves or other predections when handling the
device as there is a risk of burns.
2.3.3 RISK OF FIRE
DO NOT OPERATE THE EQUIPMENT IN ENVIRONMENTS WITH AN
EXPLOSION HAZARD!
Do not overheat parts.
Do not heat materials above their melting point; in such cases, there is a risk
of being spilled with hot metal and burns.
Be careful about fire if the device is kept near one. Keep inflammable
substances outside the working area.
Do not put the device on, over or near inflammable surfaces.
Do not use the machine if it is near objects that may contain inflammable
particles of dust, gas, vapour or liquids. After completion of work with the
device, check the area to make sure everything is secure and there is no risk
of sparks, flames and fire.
2.4
WARNING WHILE HANDLING THE DEVICE
2.4.1 SAFETY EQUIPMENT WHEN WORKING WITH THE DEVICE
Always wear predective goggles or face mask when using the device.
Use of the device may produce dangerous waste gases from burning of old
paints, lubricants, sealants, glues, etc. These exhausts may be toxic. Always
use adequate predective masks or respirators.
Always use predective gloves with adequate thermal resistance when
working with the device. The high temperatures produced by using the device
may cause serious burns on contact with the heated part.
Summary of Contents for 2170
Page 33: ......
