BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Tel.: 02196 720480
Fax.: 02196 7204820
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
15
„HC“ Heating mode
Enables selection of desired heating mode. The following options are available:
-
CF = control based on desired magnetic field intensity
-
CP = control to desired heating power
„Po L“ Maximum output power
Allows you to select the maximum inverter output power, which is convenient for small coils, limited by
maximum power or current. This enables use of specialised, small or wire coils, which would
otherwise overheat.
The other advantage is the possibility of limiting the max. power to the minimum required, which in
combination with the CP power control mode significantly reduces device overheating and increases
the heating efficiency.
„ic.L“ Power Line Current Limit
Enables limitation of current consumed from the power line, which permits trouble-free use of the
device in grids with poorer switchgear, e.g., in repairs, construction industry, workshops, etc.
„FIL“ Coolant filling and venting
Used for manual activation of venting and coolant filling.
„CoL“ Cooling settings
Used for selecting the preferred cooling mode. The following options are available:
-
Lo – silent mode, where the user prefers quieter cooling and does not mind higher grip
temperature. It is convenient for small workshops and production floors that require silence.
-
Std, standard – optimum choice between the silent mode and maximum power, suitable for
general use.
-
Hi – maximum capacity mode, increasing the cooling intensity at the expense of noise. The
advantages are lower grip temperature and maximum power. It finds application in more
demanding use.
FAC „Factory setting“
Reverts to factory settings.
Firmware
Displays the current device firmware version.
Unlock code
Allows unlocking some device settings and features by entering a code.
9
LIST OF ERROR MESSAGES
Error
Description
1
Undervoltage
2
Overvoltage
3
Input overcurent
4-5
Output overcurrent
6
Overload
7-8
Frequency – min/max
9-10-11
Resonance circuit and frequency control error
12
Out of coolant
13
Hose squeezed or clogged
14-15-16-17-18
Device overheating
19
Wrong grid frequency
20-256
Device servicing errors
Summary of Contents for 2170
Page 33: ......
