BGS technic 2170, Instruction Manual

Page: 30 / 33

BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
14
The heating is limited:
•
„---„ = no limitation, heating proceeds optimally
• „po“ = by maximum device power
• „ic“ = by maximum input current
• „oc“ = by maximum inverter output current
• „dut“ = by maximum inverter output voltage
• „tE“ = by max. temperature
Errors
Shows a history of the latest errors that have occurred in the device. Turning the encoder clockwise
shows the full error history progressively.
8.6 Setting
Allows setting the heating parameters.
Press the encoder repeatedly until the

indicator lamp glows red

. Then turn the encoder to
select the parameter to display or set and press to confirm. The indicator lamp glows green

. Now
you can turn the encoder to set the desired parameter value. Press the encoder to confirm the setting;
this will return you to selection of another parameter, or select “---” to go to the next setting. To exit to
power settings immediately, press and hold down the encoder.
The display has the following states:
Indicator lamp Status

red parameter selection

green value setting
The following parameters can be set:
Name Display Value
Return / exit ---- ----
Heating mode REG
CF = constant magnetic field / current
CP = constant heating power
Limiting input current Ic.L
6.0 max. – 16.5A
= limit input current
Max. output power Po.L 2.0 max. – 4.5kVA; Standard 4kVA
Cooling CoL
Lo = silent mode (workshops, short-term capacit)
Std = standard mode
Hi = max. capacity / does not switch off
Water fill FIL
No
Yes = activates filling and venting
Factory setting FAC
No
Yes = factory setting
Unlock code UnL servicing menu code, to unlock features
Firmware Fir shows firmware version