BGS technic 2170, Instruction Manual

Page: 27 / 33

BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
11
8.1.1 Heating indicator lamp
- Indicates heating status.
Indicator lamp Status

green heating in progress

yellow warning – limited heating output

red heating error – overloading

red,
flashing
heating error – wrong coil
8.1.2 Cooling and overheating indicator lamp
Indicator lamp Status

green cooling in progress

green,
flashing
only water circuit active, venting

yellow warning – near overheating

red
cooling error – no coolant or hose
squeezed
8.2 Activating the device
- Check the coolant level and refill if necessary.
- Connect the device to a socket and turn it on using the switch at the back of the device
- The device auto diagnostic test (self-test) is initiated automatically and the cooling circuit is
vented; the letters “FIL” flash on the display during this.
- If the device detects lack of coolant, it displays the error message E12: In that case, refill the
coolant in the tank
- If everything is in order, the device switches to standby.
8.3 Standby
This is the initial device status, which allows turning the encoder to set the desired heating power or
temperature, depending on the mode selected:
- Controlled power mode (CP), indicator lamp glows red

– the user sets the desired heating
power in % of maximum heating power and the device automatically adjusts the required
parameters to maintain the set power.
- Controlled magnetic field mode (CF), indicator lamp glows green

– the user sets the desired
field intensity in % of maximum field intensity and the device automatically maintains the set field
intensity.
The indicator lamp starts flashing during the heating and the display shows the current readings of
power output in kW.
The desired heating mode can be set in the settings or switched by pressing and holding down the
encoder – the display shows the corresponding mode name CP/CF and the colour of indicator lamp
changes.
Press the encoder to move to further device parameter settings, such as the heating timer, etc.
Indicator lamp Status

green magnetic field intensity setting in %, mode CF

green, flashing power reading in kW during the heating

red heating power setting in %, mode CP

red, flashing power reading in kW during the heating