BFT DEIMOS BT KIT UL, Installation And User Manual

Page: 18 / 28

.P+
*M%'A
OK
+ -
+ -
OK
- +
- +
- +
- +
- +
- +
- +
- +
- +
- +
.P%
[ ]
OK OK RA
OK OK
[ ]
.P%
-.2
OK OK
[ ]
.P%
!*12
- +
OK
RA
ON
OFF [
M$$
]
.P% OK
OK QRCN
ON
OFF
[
M$$
]
.P% OK
OK G@JMNCL
ON
OFF
[
M$$
]
.P%
OK
OK
NFMRMAMNCL
ON
OFF
[
M$$
]
.P% OK
OK
R#QR.FMR
ON
OFF
[
M$$
]
.P%
OK
OK
ON
OFF
[
M$$
]
.P%
OK
OK
NPC?J
FMJBRMPSL
OK
ON
OFF
[
M$$
]
.P%
OK QR?PRAJMQC
ON
OFF
[
M$$
]
.P% OK
- +
OK
P?BGMNPME
ON
OFF
[
ML
]
.P% OK
- +
- +
OK
DGVCBAMBC
ON
OFF
[
M$$
]
.P%
OK
- +
OK OK
[ ]
.P% LMPKMNQNCCB
LMPKAJQQNCCB OK OK
[ ]
.P%
- +
- +
OK OK
[ ]
.P%
QJMUQNCCB
OK OK
8MLC
[ ]
.P%
- +
OK OK
[ ]
.P%
MNRQJMU
- +
OK OK
[ ]
.P% AJQRQJMU
- +
OK
+1R#P
ON
OFF
[
M$$
]
.P%
OK
- +
OK
*MM.
ON
OFF
[
M$$
]
.P% OK
Fig. A
FOLLOWING MENUS
FIG. B
PARAMETER MENU
TCA (automatic closing time)
value expressed in seconds
(default 10=10s, min 3=3s, max 120=120s)
Opening Motor torque – value
expressed in % (default 80%, min 1%, max
99%)
Closing Motor torque – value expressed
in % (default 80%, min 1%, max 99%)
Slow-down opening motor torque –
value expressed in % (default 50%, min
1%, max 99%)
Slow-down closing motor torque – value
expressed in % (default 50%, min 1%, max
99%)
Fast opening time
value expressed in seconds
(default 15=15s, min 1=1s, max 2=2 min)
Fast closing time
value expressed in seconds
(default 15=15s, min 1=1s, max 2=2 min)
Slow-down numerical value
(default 0, min 0, max 3)
Zone numerical value
(default min 0, max 127)
+ -
$',#
+ -
$',#
OK
$2
OQABSJ
OK
OK
LEGENDA
[ ]
Preset value
Parameter increment/reduction
or ON/OFF commutation
Menu scrolling
(+ = preceding - = following)
Press OK key (Enter/confirm)
Message: Programming in progress
.0%
OK
+ -
- +
/ON
/OFF
Message: KO! (value or function error)
Simultaneously press the + and - keys.
Simultaneous pressure of the + and – keys
allows you to exit the active menu and return to
the preceding menu; if this takes place at the
main menu level, programming is exited and
the display switched off.
The modifications made are only confirmed if
the OK key is subsequently pressed.
Message: “Wait” (enter value or function)
Press the OK key
ACCESS TO MENUS
Control unit software version
No. total manoeuvres
(in hundreds)
No. manoeuvres since latest
maintenance (in hundreds)
No. radio control devices
memorised
18 -
DEIMOS BT UL Ver. 07
D811419_07