BFI Automation CFC 100, Original Operating Instructions

Page: 38 / 48

Description
5-2
5.3 Hand held terminal HT 100
A flame analysis can be made with the hand held terminal
HT 100 as well as sensitivity adjustment of both channels.
All data of the CFC 100 can be shown.
More information about the HT 100 you will find in the
document BA HT100 EN.
5.3.1 Menu item “Detector”
This menu item gives the following information about the
device:

Operating hours of CFC 100 and the UV tube

Startup counter

Firmware version
5.3.2 Menu item “Values”
Here all available values can be called:

Actual value in digits and as bar indicator

Average of xx measuring in digits (number can
be edit)

Shutter value

Current output 4 to 20 mA in digits and as bar
indicator

Recorded max. value

Recorded min. value

Min.-and max. value reset
5.3.3 Menu item “Switch-off time”
By choosing this menu item the actual set switch-off time
is displayed