BFI Automation CFC 100, Original Operating Instructions

Page: 15 / 48

Safety
2-3
2.3 Safety instructions
The following instructions on accident prevention have to
be observed when operating the compact flame controller.
Only operate the device if it is in a proper state !

Do not remove or disable safety devices.

Check for externally noticeable damage and defects
prior to using the device ! Immediately notify the appro-
priate authority/person of any changes that occur (in-
cluding changes in operating performance). If neces-
sary, stop and secure the device immediately.

Allow only authorised specialist staff to carry out set-up
and/or maintenance work.

Replace worn or defective parts.

Use suitable maintenance tools only.

After repair work, refit all safety devices and carry out
electrical and mechanical checks.

Check the operating instructions for details of displays
as well as switch-on and switch-off procedures.

Prior to switching on the device, make sure that no-one
can be endangered by the device !

The operating company is responsible for ensuring that
the device is only operated in a proper state and that
account is taken of all the appropriate safety require-
ments and provisions.

The operating instructions always have to be kept
close to the device and be readily at hand.

Any non-compliance with the safety instructions out-
lined in these operating instructions may lead to dam-
age to property, personal injury or even death.