BEYES EndoPilot Instructions For Use Manual Download Page 31

31

guidance and manufacturer’s declaration - electromagnetic emissions
The EndoPilot is intended for use in an electromagnetic environment in which radiated RF 

disturbances are controlled. The customer or the user of the EndoPilot can help prevent 

electromagnetic interference by maintaining a minimum distance between portable and mobile 

RF according to the maxi mum output power of the communications  equipment.

Rated maximum 

output power of

transmitter Watts [W]

Separation distance according to frequency of transmitter (in meters) 

Meters [m]
150 kHz   80 Mhz

80 MHz   800 Mhz

800 MHz   2. 5 GHz

0.01

0. 12

0. 12

0.23

0.1

0.38

0.38

0.23

1

1.2

1.2

2.3

100

12

12

23

For transmitters rated at a maximum output power not listed above, the recommended separa-

tion distance d in meters (m) can be estimated using the equation applicable to the frequency 

of the transmitter, where P is the maximum output power rating of the transmitter in watts(W) 

according to the transmitter  manufacturer.

NOTE 1 : At 80 MHz and 800 MHz, the separation distance for the higher frequency range 

applies.

NOTE 2  :  These  guidelines  may  not  apply  in at I  situations.  Electromagnetic  propagation  

is affected  by absorption  and reflection from  structures,  objects, and people.

 
1.  The main engine of Cordless Endodontic Micromotor (including Motor Handpiece and 

Contra Angle Handpiece) enjoy one year free warranty.

2.  The following circumstance does not belong to the scope of free warranty:

a) Using the product did not follow the matters needing attentions in user`s manual;
b) Disassembling the product by yourself;
c) Altering the invoice or without the invoice.

3.  Fill up the following information, then send it back to us with our products.

User’s Name: 

Telephone Number:

Address:

Trouble Description:

(The information such as: When, Where and How it happened. How many times)

Warranty Card

Summary of Contents for EndoPilot

































Reviews: