11
SELECT Key ( )
(When the motor is running, the key is invalid)
• Press the SELECT key to ‘speed , torque or gear ratio setting', or ‘ Rotation Mode
selection'
• Press shortly the SELECT key, it will be displayed “speed, torque or gear ratio
setting”
• Enter “speed, torque or gear ratio setting” to make the change of the related setting.
By the sequence of SPEED — gEAR RATIO- TORQU E-EXIT, in circle; adjust the
value by press + or -
• Press “P” a little long time to remember the setting, for future use
• To quit the “speed, torque or gear ratio setting"; 1 , press “S” when setting torque; 2,
Press “S" a little long time ; 3, press ON/OFF ,
• “P" or operation to quit.
• Pressing and holding this SELECT Key for 1 second or longer, when the motor is
stopped can change the Rotation Mode.
• Enter the Rotation Mode selection: the sequence will be, AUTO REVE RSE-AUTO
STOP-AUTO REVERSE OFF- REVERSE- RECEPROCATIN g, in circle: adjust the
value by press + or -
• Press “P” a little long time to remember the setting, for future use
• To quit the ‘Rotation Mode selection’; 1 , Press “S"; 2, press ON/OFF , P or
“operation" to quit.
PROGRAM Key ( )
(When the motor is running, the key is invalid)
• A program can be selected. The present program number is displayed. There are 5
programs available, numbered from 1to 5.
• Up to five programs can be set, and program settings can be memorized by pressing
this key for one second or longer.
• The following parameters can be set: Speed, torque, gear ratio and auto reverse
setting.
+/- Key ( )
• Use this key when adjusting the torque.
• Unit with other function to adjust the value.