18
Reciprocating
In the genera I condition, when the Endo Motor Rotate in rounter- clockwise motion wiII
be claim as reverse motion. the traditionaI rotary files withdrawing from the canal by
reverse motion. Therefore, beep sound wiII occur when using this function.
Load lower than the set torque Limit
value, anticlockwise and Clockwise in
turns (reciprocating)
load higher than the set torque
limit value, clockwise rotation with )
alarm warning sound
Notice
• Under the REC I P ROCAT I Ng mode, just only 16:1 or 20: 1 is supported. The
setting must according to the actual contra angle handpiece.
• Speed, Torque can not be set or display
Caution
This function is desgined specially for the REC IP ROCAT I Ng ROTARY FILES, the
cutting side is on the anticlockwise motion,
the clockwise motion is for file to get out. If the load higher than the formatted torque
(torque cannot be set), the motor will rotate clockwise continously to let the file get out
the canal. For next time use, only need to press ON/OFF key