13
5. Operations
5.1 Charging Batteries
1. Insert the power cord jack into the inlet at the back of the battery charger.
(Fig. a)
2. Insert the power cord and plug in. Make sure you have the correct model/voltage.
(Fig. b)
3. Turn on the power switch. At this time, check that the power lamp lights up.
4. Insert the motor handpiece into the battery charge. Charging starts with the charge
mark flashing on LCD.(Fig. c)
5. When the buzzer sounds and is displayed on the liquid crystal panel, charging is
completed.
Notice
The handpiece can be charged directly by USB cable, even there is no power
cord. But please ensure the handpiece be pIaced in dry condition.
Warning
When the buzzer does not sound and the charging animation is not displayed,
please take off the handpiece, check the “ERROR, CODE” to find out the
problem.