21
Caution
• This function does not work unless remaining battery capacity is sufficient.
• Perform calibration after cleaning the contra angle. Residuals will affect the
calibration.
• Do not attack any rotary files or other when calibration.
• Do not shake the motor when calibration.
• This function can achieve the perfectly match between the handpiece with contra
angle. However cannot match to more than 1 different contra angle.
6.4 Alarm sound setting
You can turn ON/OFF the alarm (load alarm) which sounds near the torque limit value
when the motor handpiece rotates.
1. Turn off the power
2. Press the S key, and then keep pressing the POWER key for one second or longer.
Release the keys when The alarm mark and ON or OFF on the LCD panel, and the
sound volume changes.
3. Press the SELECT key to select OFF, MIDDIUM or MAX for alarm sound.
4. Press POWER key to make the set memorized, or the motor will re- start after 5
seconds, if there is no operation.
5. Display on the LCD returns to the original state if no operation is performed for a
while.