Beyerdynamic MCS-D 200 Page 46 Operating Instructions Manual Download | Manualshive

Page: 46 / 88

background image

MCS-D 200 – Microphone Units

46

6.

Microphone Units

For the MCS-D 200 system there is a variety of microphone stations available. Make sure that the microphone and all cables are tightly and
properly connected. If a cable is not properly connected, interferences can occur.

Safety Information

• Conference microphone stations with metal casings are heavy, so always position them on a secure surface.
• If you use earphones or headphones with the microphone station, please do not set the volume too high, it could permanently damage

your hearing.

6.1

Revoluto Microphone Units

The Revoluto MCS-D 3173/3171, MCS-D 3143/3141 and MCS-D 3123/3121 microphone units provide the patented Revoluto technology,
which allows a unique design without gooseneck microphone. Due to the redundant recording technology with several intelligently
arranged microphone capsules, a complete failure of the microphone unit is practically impossible. The corridor characteristic of the
microphone unit provides maximum freedom of movement for the speaker and a much wider zone within which he/she can speak without
affecting the recording volume.
All settings of the microphone stations are stored when the system is turned off. Standard settings can be reloaded via the MCS-D 200
control unit.

6.2

Microphone Units with Gooseneck Microphone

Regarding the operation the MCS-D 3073/3071, MCS-D 3043/3041 and MCS-D 3023/3021 microphone units provide the same design as
the Revoluto microphone units. Instead of the patented Revoluto technology, however, they provide a fold-away gooseneck microphone.
All settings of the microphone stations are stored when the system is turned off. Standard settings can be reloaded via the MCS-D 200
control unit.

MCS-D 3173/3171 and MCS-D 3073/3071

The microphone units provide an LC-display, one microphone button, five voting buttons and a two-way loudspeaker with two tweeters.
The up / down navigator buttons allow selecting the desired channel while the headphone volume is set by using the right / left navigator
buttons. In addition to this the MCS-D 3173/3073 chairman microphone unit provides one “Clear” and one “Priority” button.

MCS-D 3143/3141 and MCS-D 3043/3041

The microphone units provide an LC-display, one microphone button, three buttons for menu, entry and ESC as well as a two-way
loudspeaker with two tweeters. The up / down navigator buttons allow selecting the desired channel while the headphone volume is set by
using the right / left navigator buttons. In addition to this the MCS-D 3143/3043 chairman microphone unit provides one “Clear” and one
“Priority” button.

MCS-D 3123/3121 and MCS-D 3023/3021

The microphone units provide one microphone button and a two-way loudspeaker with two tweeters. In addition to this the
MCS-D 3123/3023 chairman microphone unit provides one “Clear” and one “Priority” button.

«
...
44
45
46
47
48
...
»

Summary of Contents for MCS-D 200

























































































Reviews:

No comments

Related manuals for MCS-D 200

Brand: Jensen Pages: 2

kb sound Series

Brand: EIS Pages: 2

AQUIS ULTRAFLOW

Brand: Waterous Pages: 217

Brand: Audiocenter Pages: 40

MFIT MERCEDES SPRINTER W907 EVO 2

Brand: Audio System Pages: 2

Brand: Prodys Pages: 156

Brand: Teufel Pages: 20

Brand: Alpine Pages: 16

Brand: Panasonic Pages: 24

Brand: Panasonic Pages: 16

Brand: Panasonic Pages: 31

Brand: Panasonic Pages: 20

Brand: Panasonic Pages: 40

Brand: Panasonic Pages: 28

Brand: Panasonic Pages: 36

Brand: Panasonic Pages: 25

SCS3050 - HES SYSTEM

Brand: Panasonic Pages: 56

Brand: Panasonic Pages: 72

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands