Beyerdynamic MCS-D 200 Page 10 Operating Instructions Manual Download | Manualshive

Page: 10 / 88

background image

MCS-D 200 – Putting into operation

10

Caution:
•

Always turn off the power when making input or output connections.
All turned on additional power supply units remain in stand-by mode even if the MCS-D 200 control unit is turned off.

• To boot the system at least 1 device has to be connected to the control unit. Otherwise the display indicates “Initialisation”

continuously.

Rear view

Front view

3.2.2 Mains Connection

• Verify that the voltage rating of the unit matches that of the AC mains outlet you are to use. If you connect the unit to the wrong

voltage, you may seriously damage it.

• Always route cables running to the unit where they will not be damaged by heavy or sharp objects.
• Connect the MCS-D 200 control unit to the mains

. The internal power supply unit of the control unit can adjust auto matically

between 100 V and 240 V at 50 - 60 Hz.

3.2.3 How to switch the Control Unit on/off

• Before switching the MCS-D 200 control unit on, please check all connections. If there are additional power supply units connected to

the control unit, we recommend switching on the devices as described in the following:
1. Switch on all additional power supply units. The illuminated power switch displays the stand-by mode.
2. Switch on the MCS-D 200 control unit

. The Power LED

is illuminated.

• When switching on, the system is booted up. A data communication is not yet possible. As soon as the control unit displays the main

menu and the microphone stations the default display (time or ID), the boot process is finished and the data communication can start.

• When switching off, all settings of the MCS-D 200 control unit are stored.

«
...
8
9
10
11
12
...
»

Summary of Contents for MCS-D 200

























































































Reviews:

No comments

Related manuals for MCS-D 200

Brand: Zenith Pages: 24

ConferenceSHOT AV

Brand: VADDIO Pages: 114

Brand: heat-timer Pages: 36

PowerVIEW HD-30

Brand: VADDIO Pages: 24

Brand: Joyonway Pages: 8

Brand: Aiwa Pages: 46

SCOPIA XT MCU series

Brand: RADVision Pages: 43

Brand: Coby Pages: 1

Brand: Kramer Pages: 4

Brand: SALUPO Pages: 22

Soundpoint IP 301

Brand: Polycom Pages: 4

Brand: Shure Pages: 18

Torsion Add-on Version 3

Brand: Instron Pages: 32

Brand: Scott Pages: 13

Brand: RCA Pages: 20

Brand: Polaris Pages: 8

Brand: Panasonic Pages: 59

Brand: Panasonic Pages: 64

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands