Beyerdynamic MCS-D 200, Operating Instructions Manual

Page: 39 / 88

MCS-D 200 – Menu
39
3.3.10.1 Ext. DAI ID List
In the Ext. DAI ID LIST menu you may enter a device identification number (logical address) for every interface unit (=EXTERNAL DAI), that is
an interface unit with 2 CH IN and 2 CH OUT each. Each interface unit is regarded as an independent device, even if there is a maximum
of 3 interface units in the same 19" housing of one DAI. The interface units are recognised when the system is started.
The identification number of the
internal D/A interface of the MCS-D 200 control unit ( =INTERNAL DAI) is fixed [=00] and cannot be
changed.
Note:
Each audio interface (DAI) provides two inputs and two outputs.
3.3.10.2 DAI Set-up
In the DAI SETUP menu you may assign channels to the LINE INPUTS and LINE OUTPUTS of the internal and external DAIs.
The DAI SETUP menu includes a list of the internal D/A interfaces of the MCS-D 200 control unit [=00] and all external DAI units; each with
its ID number that has been set in the EXT. DAI ID LIST menu.
The identification number of the internal DAI of the MCS-D 200 control unit is fixed and cannot be changed.
Use the up or down navigator button to scroll through the list. Use the ENTER button to select a DAI for assigning channels. The LED on
the front of the DAI interface will illuminate for the selected D/A unit.
Use the up or down navigator button for
scrolling
Use the right or left hand
navigator button to enter the new
ID number!
press the ENTER button
press the SET ID button to confirm
EXTERNAL DAI 1 (of 3 DAIs); the appropriate LED
will illuminate on the front of the DAI
Hash indicates that the ID number has been
already assigned to another device. Select a
different number!
press the ENTER button
Internal DAI [=00] of the control unit
Use the up or down button for
scrolling