MCS-D 200 – Safety Information
7
Fire hazard
•
Never place naked flames near the equipment.
•
Never expose the equipment to rain or a high level of humidity. For this reason do not install it in the immediate vicinity of swimming
pools, showers, damp basement rooms or other areas with unusually high atmospheric humidity.
•
Never place objects containing liquid (e.g. vases or drinking glasses) on the equipment. Liquids in the equipment could cause a short
circuit.
Ventilation
•
Do not insert objects into the ventilation grilles or other openings. You could damage the equipment and/or injure yourself.
Connection
•
The equipment must be connected to a mains socket that has an earth contact.
•
Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit
from the apparatus.
•
Lay all connection cables so that they do not present a trip hazard.
•
Whenever working on the equipment switch off all inputs and outputs to the power supply.
•
Check whether the connection figures comply with the existing mains supply. Serious damage could occur due to connecting the system
to the wrong power supply. An incorrect mains voltage could damage the equipment or cause an electric shock.
•
Please note that different operating voltages require the use of different types of power cable and plugs.
Please refer to the following table:
•
If the equipment causes a blown fuse or a short circuit, disconnect it from the mains and have it checked and repaired.
•
Do not hold the mains cable with wet hands. There must be no water or dust on the contact pins. In both cases you could receive an
electric shock.
•
The mains cable must be firmly connected. If it is loose there is a fire hazard.
•
Always pull out the mains cable from the mains and/or from the equipment by the plug – never by the cable. The cable could be
damaged and cause an electric shock or fire.
•
Do not use the equipment if the mains plug is damaged.
•
If you connect defective or unsuitable accessories, the equipment could be damaged. Only use connection cables available from or
recommended by beyerdynamic. If you use cables you have made up yourself, all claim to warranty is null and void.
Maintenance
•
Only clean the equipment with a slightly damp or dry cloth. Never use solvents as these damage the surface.
Trouble shooting and servicing
•
Do not open the equipment without authorisation. You could receive an electric shock. There are no user-serviceable parts inside.
•
Leave all service work to authorised expert personnel.
Microphone Units
•
Conference microphone stations with metal casings are heavy, so always position them on a secure surface.
•
If the microphone stations have a gooseneck microphone take care that you do not injure yourself on this e.g. poke it into your eye.
•
If you use earphones or headphones with the microphone station, please do not set the volume too high, it could permanently damage
your hearing.
•
To align the gooseneck microphone on the microphone station and to avoid twisting it too far and causing premature
wear, always grip the microphone by the bottom flexible section never by the microphone head or by the rigid tube.
The gooseneck must be bent no further than an angle of 90° maximum.
Voltage
Power plug according to standard
110 - 125 V
UL817 and CSA C 22.2 no 42.
220 - 230 V
CEE 7 page VII, SR section 107-2-D1/IEC 83 page C4.
240 V
BS 1363 (1984): “Specification for 13A fused plugs and
switched and un-switched socket outlets.”
Summary of Contents for MCS-D 200
