Beyerdynamic MCS-D 200, Operating Instructions Manual, Page: 54 / 88

MCS-D 200 – Microphone Units
54
In the following you will find some examples for channel descriptions. The list has been created via the menu of the MCS-D 200 control
unit beforehand.
Channel 1 is the conference or original channel (OR).
Channel 2 is the English channel.
Channel 3 is an information channel.
The settings remain stored even when the system is turned off.
6.4.7 Votings
MCS-D 3173/3171 and MCS-D 3073/3071
The MCS-D 3173/3171 and MCS-D 3073/3071 microphone units provide 5 buttons for votings allowing parliamentary votings with “Yes”,
“No” or “Abstain” as well as multiple choice votings with all 5 buttons.
Votings can be carried out with the iCNS software. Refer also to the “iCNS” manual.
6.4.8 Mounting
At the bottom all microphone unit versions provide mounting sockets. Please note that the maximum depth the M4 screw is screwed into
the microphone is approx. 8 mm. Refer also to the separate drilling template.
6.4.9 LED to indicate low voltage
At the bottom all microphone unit versions provide an LED to indicate low voltage. Should this LED illuminate red, the operating voltage
for the appropriate microphone unit/s is too low and the number of microphone units must be reduced.
channel 3
inf
channel 1
or
channel 2
eng