manualshive.com logo in svg

Beyerdynamic MCS-D 200, Operating Instructions Manual, Page: 30 / 88

Share
Download
Beyerdynamic MCS-D 200 Operating Instructions Manual Download Page 30

MCS-D 200 – Menu 

30

3.3.6 Options 

3.3.6.1 Time

In the TIME menu the system time for the MCS-D 200 control unit, MCS-D 202 and MCS-D 2073 microphone stations can be set manually
in the format HOURS – MINUTES – SECONDS.
When the iCNS software is started, the system time is refreshed automatically. 

The current system time is displayed in the CURRENT TIME line as:
HOURS : MINUTES : SECONDS.
You can change the time in the line below. Use the

right or left hand navigator button

to go from HOURS to MINUTES and SECONDS.

Use the 

up or down navigator button 

to set the new values and press the SET button to confirm. 

press the ENTER button

Use the up or down navigator button for scrolling

Current time setting

Refreshed time setting

press the SET button to confirm

Use the right or left hand navigator button to go
from HOURS to MINUTES and SECONDS

Use the up or down 
navigator button to edit
the numbers

Summary of Contents for MCS-D 200

























































































Reviews:

No comments