Beyerdynamic MCS-D 200 Page 25 Operating Instructions Manual Download

Page: 25 / 88

MCS-D 200 – Menu

How to select the required interpreter’s booth(s) for the session

Select all booths required for the selected session from the booth list (refer to chapter 3.3.7.1 “ID List”).

Use the up or down navigator button to select the booth required for the session (here: 01). Then press the

SET

button. The star identifies

the selected booth. Repeat these steps to select more booths.

To remove a selected booth from the session press the

RESET

button. The star is removed. Repeat these steps if you want to remove more

booths from the session.

Press the EXIT button to leave the menu.

The arrow indicates the active line.

Session number

Booth number

press the ENTER button

The star identifies the selected booth.

Use the up or down navigator button to scroll
through the menu

Summary of Contents for MCS-D 200

























































































Search results

Summary of Contents for MCS-D 200

Reviews:

Related manuals for MCS-D 200

Brands by name

Popular brands

Beyerdynamic MCS-D 200, Operating Instructions Manual

Search results

Summary of Contents for MCS-D 200

Reviews:

Related manuals for MCS-D 200

Brands by name

Popular brands