Beurer BM 93, Instructions For Use Manual

Page: 53 / 232

53
Problem /
Error Message
Possible cause Solution
The ECG measurement
shows EE on the display.
- Contact pressure on the
skin is too weak.
- The measurement was
interrupted.
- The sound level was too
high during the measure-
ment.
Repeat the measurement as
perthe instructions in these
Instructions for use.
The batteries are almost
empty.
Replace the batteries.
The device will not switch
on.
The batteries are flat. Replace the batteries.
The batteries have been
inserted incorrectly.
Re-insert the batteries, observ-
ing the correct polarity (-/+).
The cuff does not inflate. The cuff line is not correctly
inserted into the device.
Ensure that the cuff line is cor-
rectly inserted into the device.
The cuff is ruptured. Replace the cuff. Contact
Customer Services.
The blood pressure
measurements are very
high/low.
The cuff was not attached
correctly.
Re-attach the cuff.
You moved or talked during
the measurement.
Do not move or talk during the
measurement.
The measurement was ob-
structed by clothing.
Ensure that clothing cannot
obstruct the arm cuff during the
measurement.