Beurer BM 93, Instructions For Use Manual

Page: 56 / 232

56
Permissible operating con-
ditions
+5 °C to +40 °C, 15 to 93 % relative humidity (non-condensing)
Permissible storage and trans-
port conditions
-25 °C to +70 °C, up to 93 % relative humidity
Power supply 4x 1.5 V AAA batteries
Battery life For approx. 240 measurements, depending on levels of blood
pressure and pump pressure
Classification Internal supply, IP21, no AP or APG, continuous operation
Blood pressure: Application part, type BF
ECG electrodes: Application part type CF
Data transfer via Bluetooth ®
wireless technology
The product uses Bluetooth ® low energy technology, frequency
band 2.400 - 2.483 GHz, maximum transmission power radiated in
the frequency band < 20 dBm, compatible with Bluetooth ® ≥ 4.0
smart phones /tablets
The serial number is located on the device or in the battery compartment.
Technical information is subject to change without notification to allow for updates.
• This blood pressure monitor complies with European Standard EN60601-1-2 (in accordance with
CISPR 11, IEC 61000-4-2, IEC 61000-4-3 und IEC 61000-4-8) and is subject to particular pre-
cautions with regard to electromagnetic compatibility. Please note that portable and mobile HF
communication systems may interfere with this unit.
• The blood pressure monitor complies with the EU Medical Devices Directive 93/42/EEC, the German
Medical Devices Act (Medizinproduktgesetz) and the standards EN1060-1 (non-invasive sphygmo-
manometers – Part 1: General requirements), EN1060-3 (non-invasive sphygmomanometers – Part
3: Supplementary requirements for electro-mechanical blood pressure measuring systems) and
IEC80601-2-30 (Medical electrical equipment – Part 2 – 30: Particular requirements for the basic
safety and essential performance of automated non-invasive sphygmomanometers).
• The ECG-electrodes complie with the EU Medical Devices Directive 93/42/EEC, the German Medical
Devices Act (Medizinproduktgesetz) and the standards IEC 60601-2-25 (Medical electrical equip-
ment - part 2-25: Particular requirements for the safety of electrocardiographs) and IEC 60601-2-47