Beurer BM 93, Instructions For Use Manual

Page: 43 / 232

43
6.2 Settings
Set the date and time
It is essential that you set the date and time. Otherwise, you will not be able to save your measured
values correctly with a date and time and access them again later.
Press and hold the function button [+] on the device when
switched off for approx. 5 seconds.
The year flashes on the display.
In this menu you can adjust the following settings in succession:
Year
➔
Month
➔
Day
➔
Hour
➔
Minute
➔
Time
format
1. Set the year using the +/− buttons on the side (you can select a year between 2000 and 2099). To
confirm the year, press the memory button M .
2. The month now flashes on the display. Set the month using the +/− buttons. To confirm the month,
press the memory button M .
3. The day now flashes on the display. Set the day using the +/− buttons. To confirm the day, press
the memory button M .
4. The hour now flashes on the display. Set the hour using the +/− buttons. To confirm the hour,
press the memory button M .
5. The minute now flashes on the display. Set the minute using the +/− buttons. To confirm the min-
ute, press the memory button M .
6.
24H
or
12H
now flashes on the display. Switch between the time format using + / − buttons. To
confirm the time format, press the memory button M .
7. The set year appears on the display again. To complete the operation, press the START/STOP
button . The device then switches off.
Setting the alarm
An optional alarm can be set on the device. To set the alarm, proceed as follows:
1. Press and hold the - button on the side for 5 seconds. “
oFF
” flashes on the dis-
play if the alarm is deactivated.
2. “ ” flashes on the display if the alarm is active.
3. Activate or deactivate the alarm using the +/− buttons. Press the memory but-
ton M to confirm the selection.