Better Water LLC; rev. May 2020
Page 19 of 78
1232 RO Operator Manual
Components That Work In Conjunction With the Control Box
Located on the back of the control box are
four switches, each with their own unique
purpose:
A
High Membrane Pressure Switch
monitors
the RO’s membrane pressure. If a high
membrane pressure condition occurs, the RO
will alarm and shut down.
Part#
ELPWSW00986
A
High Pump Pressure Switch
monitors
the RO’s pump pressure. If a high membrane
pressure condition occurs, the RO will alarm
and shut down.
Part#
ELPWSW00988
A
High Product Pressure Switch
monitors
the product pressure from the RO. If a high
product pressure condition occurs, the RO
will alarm and shut down.
Part#
ELPWSW00987
A
Low Pressure Switch
monitors the suction side of the pump during operation and flush
modes, but not in the disinfect cycle. In the event there is insufficient pressure to the RO, the RO
will alarm and shutdown.
Part#
ELPWSW00985
.
There are also two
Conductivity Probes (Feed & Product)
,
which work in concert to measure TDS as a function of
conductivity. These work in conjunction with the water
quality monitor to display feed and product TDS and to
determine poor water quality.
part#
EQSUBCP01545
Conductivity Probe
Summary of Contents for 1232 RO
