manualshive.com logo in svg

Better Water 1232 RO, Operator'S Manual, Page: 7 / 82

Share
Download
Better Water 1232 RO Operator'S Manual Download Page 7

 

Better Water LLC; rev. May 2020 

 

Page 3 of 78 

1232 RO                                                                                  Operator Manual 

WARNINGS 

 

 

1.

 It is unsafe to operate or service this device without first reading and understanding the 

entire

 

Operator and Service Manuals. Keep this manual and other associated documentation for future 
reference. 
 

2.

 Misuse, improper operation, and/or improper monitoring of this system could result in serious 

injury, death, or other serious reactions to patients undergoing hemodialysis treatment. 

3.

 Misuse, improper use or handling of disinfectants and chemical cleaning solutions could result 

in serious injury or even death.  You must comply with the information contained in the Material 
Safety Data Sheet (MSDS) for the chemical being used. 
 

4.

 To avoid electrical shock hazard, do not operate this device when the covers or panels are 

removed. 
 

5. 

 

ELECTROMAGNETIC INTERFERENCE: This device can create and radiate  

 

 

radio frequency energy and may cause harmful interference if not installed  

 

 

according to the manufacturer's instructions

. 

 

 
 

CAUTIONS  

 

1.

 When used as a medical device, federal law restricts this device to sale by or on the authority 

of a physician. Per CFR 801.109 (b)(1). 
 

2.

 Improper operation of this device could result in a low or no-flow alarm on the dialysis 

machines. 
 

3.

 Misuse or improper operation of this device will void any warranty. 

 

4.

 Where water is mentioned, unless otherwise noted, it must be AAMI standard quality water. 

 

5.

 Electrical and plumbing connections must adhere to local statutes and any facility codes.  

Connect this device to a proper ground connection in accordance with the National Electrical 
Code.  Do not remove the ground wire or ground plug.  Do not use an extension cord with this 
device. 
 

6.

 Do not remove any Caution, Warning or any other descriptive labels from the device. 

 

7.

 Do not operate this device in an explosive environment or in the presence of flammable 

materials.  Do not use this device to store, mix or transfer flammable liquids. 
 

8.

 Movement or vibrations during shipment may cause connections to loosen. 

 

9.

 Do not operate this unit in an environment where temperatures may be below 50

o

 F or above 

90

o

 F. 

 

10.

 

This device should not be used for purposes outside the device’s stated applications, 

specifications or limitations. 

Summary of Contents for 1232 RO



















































































Reviews:

No comments