BETTCHER INDUSTRIES 1000M2, Operating Instructions And Spare Parts Lists

Page: 42 / 87

TECHNICAL BETTCHER LARGE MODULAR SERIES II WHIZARD

MANUAL INDUSTRIES, INC. REV. June 28, 2012
Page 36
9.4 Assembly Of Handpiece (Continued)

Pick up the Whizard

Trimmer

Pick up a spacer ring or optional thumb support

If the optional thumb support is used, align the thumb
support tab with one of the notches on the underside of
the frame

The optional thumb support should be located on the
opposite side of the grease cup

While holding the Trimmer, pick up a handle and align the four (4) handle tabs with
the four notches located on the threaded portion of the frame tube

Firmly push the handle towards the bottom of the spacer ring or optional thumb support,
and align the handle tabs with the notches on the front of the tube as shown

For the initial adjustment position, the short groove on the handle should be on top, as
shown.
NOTE: The handle can be adjusted to suit the operator and the work station by pulling the
handle back away from the frame and re-locating it on another set of notches on the frame
tube.

Screw on the handle retaining knob.

Tighten firmly but take care not to overtighten or the handle will be damaged.
Handle Tabs (4)
Optional
Thumb
Support
Handle
Retaining
Knob
Frame Tube Threads
And Notches
Grease Cup
Frame
Notches
Short Groove