BETTCHER INDUSTRIES 1000M2, Operating Instructions And Spare Parts Lists

Page: 20 / 87

TECHNICAL BETTCHER LARGE MODULAR SERIES II WHIZARD

MANUAL INDUSTRIES, INC. REV. June 28, 2012
Page 14
8.2 Handle - Assembly And Adjustment (Continued)
The Disconnect Casing

Connect the casing to the Bettcher Industries motor as described in the motor manual.

Hold the trimmer in the hand you will use in operation, and with the other hand, grasp the
casing and push it into the end of the tool through the handle retaining knob.

Push the casing in until the latch catches the casing.

The disconnect lever rotates freely around the handle.

Align the disconnect lever in the notched-out area of the handle. Slightly open the fingers on
the hand holding the trimmer. Push the casing inward and hold the lever down in the handle
groove with the normal operating hand.

Check to see that the lever is seated completely flat within the groove.

Release the lever and the casing should pop out and stop the blade from turning. The motor
will continue to operate.
WARNING
SHARP BLADES MAY CAUSE CUT INJURY!
NEVER LAY THE HANDPIECE DOWN ON THE WORK STATION OR LET IT HANG BY THE
FLEX SHAFT CASING.
ALWAYS TURN OFF AND PLACE THE HANDPIECE IN THE HANGER BRACKET.
NEVER PLACE THE HANDPIECE IN THE HANGER WHILE THE BLADE
IS STILL REVOLVING!
Handle Retaining Knob
Disconnect Lever
Handle Groove