C4
Make certain the red wire is connected to the positive
side and the black wire to negative while attaching the
power leads. Damage to the unit can occur if the leads are reversed.
8. Install the boom control switch box on top of the Raven Controller as shown in photo
above. If a Raven controller is not being used with this sprayer, choose another suitable mounting
location in the tractor cab. For further information on the function of this control box, refer to the
Boom Control Section under Operation.
9. Connect the wiring harnesses leading into the tractor to the appropriate controls, including
the boom control switch box, and the spray controller unit.
10. If the tractor used to tow the sprayer is equipped with an open center hydraulic system, a
valve cartridge in the hydraulic manifold under the sprayer tank will need to be replaced. For
instructions to replace the valve cartridge, refer to page C12.
IMPORTANT:
Summary of Contents for field-pro IV 1600
