background image

Warranty Information

BESTOP® 1-YEAR LIMITED WARRANTY

WHAT BESTOP WARRANTS

Subject to the terms and conditions of sale, including any terms and conditions set forth by Bestop, Inc. (“Bestop” or 

“us” or “we”) in our then-current terms of sale on our website (collectively, the “Terms”), Bestop represents and warrants 

that: the covered products listed in the “Covered Products and Warranty Periods” section (a “Product”) will substantially 

be free from defects in materials and workmanship for the specified warranty periods set forth in that section.

THE WARRANTY IS LIMITED AND CONDITIONAL

This warranty applies to the original purchaser of the Product only. The warranty is valid only as long as the original retail 

purchaser owns the vehicle upon which the Product is installed. The warranty expires should the Product be removed 

from the original vehicle or if the original vehicle is transferred to another owner. This warranty is not transferable or as-

signable. The warranty does not apply to Product bought from auction-style or price-bid websites.

THE LIMITED WARRANTY AND STATED REMEDIES ARE SOLE AND EXCLUSIVE AND IN LIEU OF ALL OTHER WAR-

RANTIES AND REMEDIES, AND COMPANY EXPRESS DISCLAIMS ALL IMPLIED OR STATUTORY OR OTHER WARRAN-

TIES, INCLUDING WITHOUT LIMITATIONS WARRANTIES OF MERCHANTABILITY, NON-INFRINGEMENTOR FITNESS 

FOR A PARTICULAR PURPOSE. IN NO EVENT WILL COMPANY BE LIABLE FOR ANY SPECIAL, INCIDENTAL, CONSE-

QUENTIAL, PUNITIVE, INDIRECT OR EXEMPLARY DAMAGES OF ANY KIND, INCLUDING LOST PROFITS OR REVE-

NUE, HOWEVER CAUSED, WHETHER FOR BREACH OR REPUDIATION OF CONTRACT, TORT, BREACH OF WARRAN-

TY, NEGLIGENCE, OR OTHERWISE, WHETHER OR NOT COMPANY WAS ADVISED OF THE POSSIBILITY OF SUCH 

LOSS OR DAMAGES. 

Some states do not allow exclusion or limitation, so this may not apply to you. This warranty gives you specific legal 

rights, and you may have other rights which vary from state to state.

EXCLUSIONS TO THE WARRANTY

The Limited Warranty excludes, and Bestop is not liable in any way for any warranty claims, damages, or defects related 

to:

• Misuse, abuse, accidents, vandalism, negligence, fire, or improper installation or modification, or improper or inade-

quate maintenance;

• Failure to comply with any Product documentation, Bestop instructions, or applicable law or regulations; use in extreme 

conditions

• Force Majeure including but not limited to, earthquake, hurricane, tornado, flooding, or other disasters natural or man-

made, civil unrest, strikes, declared or undeclared war, or lack of performance by, or discontinued product of, supply 

chain partners whose products, software, operations or management is beyond the control of Bestop;

• Damage resulting in breakage (including without limitation, spontaneous breakage, accidental breakage or breakage 

by any other means)

of a Product or any component part;

• Damage to vinyl windows due to misuse, or cracking due to varying weather conditions.

YOUR SOLE REMEDY

During the applicable warranty period, Bestop shall, at its option, either repair or replace any Product that it confirms, in 

its discretion, is non-compliant with the warranties herein. Bestop will not pay for labor charges associated with installa-

tion or removal of the Product. Should a specific Product be discontinued, Bestop may, at its option, replace the discon-

tinued Product with a current product or like product.

Please retain your proof of purchase. Original proof of purchase for the Product must accompany any warranty claim. If 

you have a warranty claim, first you must email Bestop Customer Service at [email protected] for instructions. All 

claims must be emailed to [email protected] within 30 days of

discovery of a defective Product, but in no event later than thirty days after the end of the applicable Warranty Period 

(the “Warranty Notice Period”). Warranty claims made after the Warranty Notice Period are null and void and Bestop 

shall have no responsibility with respect to such claims.

THIS SECTION SETS FORTH BESTOP’S SOLE OBLIGATION & YOUR SOLE REMEDY WITH RESPECT TO ANY 

DEFECTS OR OTHER PRODUCT ISSUE. ANY PRODUCTS REPLACED UNDER TERMS OF THIS WARRANTY WILL BE 

COVERED UNDER TERMS & BALANCE OF THE DURATION OF THE ORIGINAL      LIMITED WARRANTY FOR SUCH 

PRODUCT.
FOR FURTHER INFORMATION OR REQUEST FOR WARRANTY WORK, PLEASE CONTACT:

BESTOP INC CUSTOMER SERVICE

TOLL FREE 1(800)845-3567

EMAIL: [email protected]

WEBSITE: WWW.BESTOP.COM

Summary of Contents for 614.04
































Reviews: