44
82.490 - Raptor
7.8. DELIVERY FILTER
•
The delivery filter (1) (figure 23) is located at the
control station.
Note:
For booms from 36 m, filtration is ensured by
a double filter.
•
It provides additional filtration.
•
To clean the filter cartridge, you must put the indexes
on
Berlogic function
(see page 30)
(DUALELEC
option, choose function
10-
).
•
To remove the filter cartridge, unscrew the filter body
(2) (figure 23) using a 27 mm wrench (wrench not
supplied with the sprayer).
The filter cartridge needs to be cleaned after
each application. Grease the seals.
Reminder: The original factory-installed filter
cartridge mesh is 4/10 (8/10 mesh is available
separately for liquid fertilizer).
7.9. PROTECTION AGAINST OXIDISING AGENTS
•
Before treatment using liquid fertilisers, it is advisable to protect the sprayer and boom with diesel oil in order
to prevent rusting or oxidation of paint work.
•
After service, the sprayer can be cleaned down with a high-pressure jet to remove all traces of dust and diesel oil.
7.10. SERVICING THE BOOM
•
After each use, rinse the pipework thoroughly, operating the sprayer for several minutes with clear water.
•
Drain the pipework, particularly if there is a risk of frost.
•
After cleaning the boom with a high-pressure jet, grease the jack rods to prevent all risk of corrosion.
•
Keep the hinges on the arms and the uprights on the fixed frame greased.
•
Touch up the paintwork as necessary.
For further information about the spray boom, refer to its technical documentation
located in this folder, in the following chapters.
23
1
2
Summary of Contents for RAPTOR 2540
