26
82.490 - Raptor
5.3. INCORPORATION HOPPER
-
This permits introduction, in alternation with water filling of the sprayer, of powders or liquid treatment products.
- This device ensures perfect product homogeneity in the water, and makes spraying operations easier.
OPERATION OF THE HOPPER
(figure 5)
-
Fill the tank partly (see filling operation
page 25).
- Open the left-hand cover (1).
- Actuate switch (6) to lower the hopper. Open the cover (2).
- Fill the hopper with phytosanitary products.
3 possibilities:
1 - Water in the main tank used:
Put the indexes on Berlogic function (DUALELEC option, choose function
02-
).
2 - Water in the rinsing tank used:
Put the indexes on Berlogic function (DUALELEC option, choose function
04-
).
3 - Externally drawn water used:
Put the indexes on Berlogic function (DUALELEC option, choose function
03-
).
- Engage the pump's hydraulic drive by pressing push-button (5).
- Bring the engine speed up to at least 1,200 rpm by raising switch (7).
•
To rapidly empty the hopper:
▪ R
eplace the cover (2).
▪ O
pen the valve (E) to position .
- The product is draw up into and incorporated in the sprayer tank.
RINSING THE HOPPER
3 possibilities:
1 - Water in the main tank used:
Put the indexes on Berlogic function (DUALELEC option, choose function
02-
).
2 - Water in the rinsing tank used:
Put the indexes on Berlogic function (DUALELEC option, choose function
04-
).
3 - Externally drawn water used:
Put the indexes on Berlogic function (DUALELEC option, choose function
03-
).
In the 3 cases:
-
Open the fill valve (4) to position
(figure 5)
which actuates the rinsing boom
(1) (figure 6).
RINSING THE CANS
3 possibilities:
1 - Water in the main tank used:
Put the indexes on Berlogic function (DUALELEC option, choose function
02-
).
2 - Water in the rinsing tank used:
Put the indexes on Berlogic function (DUALELEC option, choose function
04-
).
3 - Externally drawn water used:
Put the indexes on Berlogic function (DUALELEC option, choose function
03-
).
In the 3 cases:
-
Open the fill valve (4) to position
(figure 5).
-
Position the product can on part (2) (figure 6).
-
Press handle (3) (figure 5) to actuate the cleaning nozzle (3) (figure 6).
•
After the incorporation operation:
▪ Close the fill valve (4) to position (figure 5).
▪ Finish the filling of the tank.
▪ When the filling is completed, disconnect the hose and replace the plug on the quick coupling (B) (figure 5).
Summary of Contents for RAPTOR 2540
