32
82.490 - Raptor
PHASE 2 - RINSING THE SPRAYING AND BOOM CIRCUITS WITH THE RINSING TANK
(With the rest of the water in the rinsing tank)
OPERATIONS PERFORMED IN THE FIELD
With the pump off.
•
Put the indexes on Berlogic function
(DUALELEC option, choose function
08-
).
- Open the spraying:
With the
C-TRONIC
control box
(figure 7, page 28):
▪ Press the
key next to the
icon.
With the
-PILOT
mutifunction joystick
(figure 9,
page 29):
▪ Press the key (6) of the
-PILOT
joystick.
- Engage the pump's hydraulic drive by pressing
push-button (3) (figure 8, page 29).
- Bring the engine speed up to at least 1,200 rpm by
raising switch (4) (figure 8, page 29).
- Spray the diluted product on the crops.
Note:
This operation is performed without water
returning to the main tank.
- Then, to close the spraying:
With the
C-TRONIC
control box
(figure 7, page 28):
▪ Press the
key next to the
icon.
With the
-PILOT
mutifunction joystick
(figure 9, page 29):
▪ Press the key (6) of the
-PILOT
joystick.
- Lower the switch (4) (figure 8, page 29) to reduce the engine speed.
- Press the push-button (3) (figure 8, page 29) to stop the pump drive.
This operation is not enough when changing chemical products.
PHASE 3 - RINSING ALL CIRCUITS WITH THE MAIN TANK
IN A RECOVERY AREA AT THE FARM
•
Put 300 liters of clear water with a cleaning product (All Clear type) in the main tank
(see filling page 25).
•
To mix the mixture, sections closed,
put the indexes on Berlogic function
.
(DUALELEC option, choose function
05-
)
.
- Engage the pump's hydraulic drive by pressing push-button (3) (figure 8, page 29).
- Bring the engine speed up to at least 1,200 rpm by raising switch (4) (figure 8, page 29).
•
Place the index (1)
(figure 11, page 30)
to position
to begin the mixing.
(DUALELEC option
, perform 2 short pressings of the
key on the
C-TRONIC
control box to activate the
manual mixing, then adjust it on 100 %
(see manual No. 82.510)
.
•
To rinse the hopper,
put the indexes on Berlogic function
.
(DUALELEC option, choose function
02-
)
.
-
Open the fill valve (4) to position
(figure 5, page 27) to rinse, then drain the hopper.
Summary of Contents for RAPTOR 2540
