background image

12

82.490 - Raptor

Tyres RAPTOR 5240 - Hydraulic variable track feature

TYRES

Track: 1.80 m to 2.25 m

Track: 2.00 m to 2.70 m

Track: 2.40 m to 3.04 m

Ground clearance: 1.10 m - 1.25 m

Min.

Max.

Min.

Max.

Min.

Max.

300/95 R 52

1.82 m

2.25 m

2.02 m

2.70 m

2.40 m

3.05 m

320/90 R 54

2.00 m

2.25 m

2.20 m

2.70 m

2.40 m

3.05 m

340/85 R 48

2.00 m

2.25 m

2.10 m

2.80 m

2.50 m

3.15 m

380/90 R 46

2.00 m

2.30 m

2.10 m

2.80 m

2.50 m

3.15 m

420/80 R 46

2.00 m

2.25 m

2.00 m

2.70 m

2.50 m

3.15 m

460/85 R 38

2.02 m

2.45 m

2.20 m

2.90 m

2.60 m

3.20 m

480/80 R 46

2.00 m

2.25 m

2.00 m

2.70 m

2.50 m

3.20 m

520/85 R 38

2.10 m

2.45 m

2.25 m

2.90 m

2.60 m

3.20 m

520/85 R 42

2.10 m

2.45 m

2.25 m

2.90 m

2.65 m

3.20 m

580/70 R 38

2.10 m

2.45 m

2.25 m

2.90 m

2.65 m

3.20 m

620/70 R 38

2.25 m

2.45 m

---

---

---

---

650/65 R 42

2.25 m

2.45 m

---

---

---

---

Ground clearance: 1.40 m

Min.

Max.

Min.

Max.

Min.

Max.

300/95 R 52

2.25 m

2.30 m

2.25 m

2.70 m

2.45 m

2.90 m

CAUTION:

 

As the track versions > 2.00 m do not guarantee a width ≤ 2.55 m, they are therefore banned in France (unless 

the tractor is fitted with devices to prevent soil compaction).

---

Version not authorised

Summary of Contents for RAPTOR 2540























































Reviews: