LB 470 Level
10 Maintenance and Repair
56925BA2 Rev. 03, 11/2017
171
Replacing fuse in the master module
1
2
3
4
Fixing screws
screws
Housing
Covering fuse
5
6
7
Fuse 250V 1A T (5x20 mm)
Base
Fuse 250V TR5 T80mA (Ø 8,5 mm)
Fig. 147 Replacing fuses master EVU
1.
De-energise the device.
2.
Loosen the four fixing screws (Fig. 147, item 1) and remove the EVU from the
wall housing or subrack.
3.
Loosen the four sunken screws on the front side of the EVU (Fig. 147, item 2).
4.
Pull out the housing (Fig. 147, item 3) carefully.
5.
Remove the protective covering of the fuse (Fig. 147, item 3)
6.
Remove the fuse (Fig. 147, item 5, item 7).
7.
Insert the new fuses and attach the protective covering again.
8.
Carefully slide the circuit board into the housing.
9.
Screw the front panel to the housing with the four screws (Fig. 147, item 2).
10.
Set module into the guide rails and push it gently until the plug connector of
the module is inserted into the socket board.
11.
Tighten all fixing screws (Fig. 147, item 1).
Summary of Contents for Duo Xpert
