Berthold Duo Xpert Operating Manual Download Page 152

Page: 152 / 233

7 Main Menu Device Setup

LB 470 Level

152

56925BA2 Rev. 03, 11/2017



The window

″

Enter description

″

appears.



The message

″

Error free

″

(Fig. 135, item 3) appears in the field

″

Backup data

″

for error-free backup files.

Click the button

<Edit>

, enter a description, and confirm with the Enter key.

Click on the button <Save>.



The backup files are copied to the USB storage device.



The message

″

Backup successful!

″

appears after a successful copy process (Fig.

135, item 6).

Information

The backup includes an XML file that is created in the folder

″

Backup_LB4700

″

The file name is derived from "Backup", the date and time
(Backup_YYYYMMDD_ hr-min-sec).

Summary of Contents for Duo Xpert










































































































































































































































Search results

Summary of Contents for Duo Xpert

Reviews:

Brands by name

Popular brands

Berthold Duo Xpert, Operating Manual

Search results

Summary of Contents for Duo Xpert

Reviews:

Brands by name

Popular brands