82
>
In the event of a malfunction, touch the Alarm
button and the display will show the fault message along
with its error code.
>
The message will be shown for 3 seconds, then it will go back to the home screen.
>
To hold the message on the screen, press the info
( ) button on the display. The message will remain on
the screen for 30 seconds, then it will go back to the home screen.
>
I
n the event that there is more than one error message, the display will show the different fault messages
in chronological order.
11.2 Malfunction messages appearing on the display
Display message
Malfunction description
Power Failure!!
Extended interruption of electrical power
The appliance automatically resumes operation and the display shows the
warmest temperatures reached
Upper unit open
Fridge door open
This message appears when the door has been open for a few minutes
Lower unit open
Freezer door open
This message appears when the door has been open for a few minutes
Replace filter
Replace filter cartridge
This message appears when only 30% of filter capacity remains
Fresco too warm
Fresco too warm
See Troubleshooting Guide
Fresco too cold
Fresco too cold
Wait for 12 hours.If the malfunction persists, call Customer Care for advice.
Refrigerator too warm
Refrigerator Compartment too warm
See Troubleshooting Guide
Refrigerator too cold
Refrigerator Compartment too cold
Wait for 12 hours.If the malfunction persists, call Customer Care for advice.
Lower unit too warm
Freezer too warm
See Troubleshooting Guide
Lower unit too cold
Freezer too cold
Wait for 12 hours.If the malfunction persists, call Customer Care for advice.
Error Code...
Operating problems
Call Customer Care, who may help you to solve the problem or put you in
touch with the nearest Service Agent.
Check condenser
Check Condenser
Every 6 months the display shows the message “Check Cond”. Clean the
condenser and press and hold the Enter button for 5 seconds to reset.
Bottle Cooler?
On
Off
11. TROUBLESHOOTING GUIDE
