Bernina 750 QE, User Manual

Page: 36 / 198

35
Functions - Display
Long stitch
̶ the sewing computer sews every second stitch
(max. stitch length 12mm)
̶ applicable for practical and decorative stitches
exception: buttonholes, alphabets
mirror image up/down
The sewing computer sews the stitch pattern mirrored
up/down referring to the sewing direction.
clear saved setting to default
⦁ touch icon
►
any alterations of the selected stitch pattern are
reset to basic setting
presser foot indicator
⦁ touch icon
►
the Display is opened showing the optional presser
feet for the selected stitch pattern
⦁ touch «Back»-icon
►
the Display is closed
permanent reverse sewing
The sewing computer sews the selected stitch pattern
in reverse.
Balance
Balances forward and reverse stitches.
Stitch counter
►
when the desired length is achieved, touch the
«Quick Reverse»-button
►
the display changes to «auto»
►
the selected stitch pattern is temporarily
programmed
presser foot pressure
⦁ alter presser foot pressure
►
the respective value is visible in the icon
needle position
⦁
move the needle position to the left or to the right
touching the arrow buttons left/right or using the
finger
⦁ keep arrow button pressed
►
quick moving of the needle
►
the needle position is displayed in the
yellow-framed icon
⦁ touch yellow-framed icon
►
the needle moves to the middle (position 0)
mirror image (Left/right)
The sewing computer sews the stitch pattern mirrored,
left/right referring to the sewing direction.
personal memory permanent
⦁ select a stitch pattern and alter e.g. stitch length or
stitch width
⦁
touch icon
►
the altered stitch pattern is saved
Security program
⦁
touch icon
⦁ touch «Needle»- or «Stitch plate»-icon
Overview Needle:
⦁ touch desired «Needle»-icon
►
stitch width is limited automatically
►
this prevents the inserted special needle (double
needle etc.) from hitting the presser foot or the
stitch plate = no needle breakage
►
numbers in the needle icons show the needle
distance in mm
⦁ touch «Standard needle»-icon
►
the standard needle is activated again
►
stitch width limitation is deactivated
Overview Stitch plates:
⦁ touch the desired «Stitch plate»-icon
►
stitch width is limited automatically
►
this prevents the inserted needle from hitting
the presser foot or the stitch plate = no needle
breakage
The function remains active even when the sewing
computer is turned off and on.
altering stitch density
Certain decorative stitches (e.g. No. 401) allow an alteration of
the stitch density. The set stitch pattern length will not be
affected.
⦁
touch arrow icon «up»
►
the stitch density is reduced in 0.05mm steps
►
the stitch distance is enlarged
⦁ touch arrow icon «down»
►
the stitch density is increased in 0.05mm steps
►
the stitch distance is reduced
If the straight stitch plate is activated, the stitch width
cannot be altered.
034247.71.04_2014-02_Manual_B750_EN