Bernina 750 QE, User Manual

Page: 22 / 198

21
Sewing preparation
Inserting a bobbin/threading lower thread
⦁ remove the bobbin case according to following description
⦁ insert the bobbin so that the thread is wound counterclockwise 1
⦁ pull the thread from the left into the slot
removing/inserting bobbin case
removing the bobbin case
⦁ raise the needle
⦁ turn power switch to «0» (off)
⦁ open bobbin cover 1
⦁ press bobbin case release 2
⦁ remove the bobbin case
Bobbin thread cutter
⦁
pull the thread over thread cutter 5 to cut it
⦁ close the cover
Inserting the bobbin case
⦁ hold the bobbin case with the thread guide 3 pointing upwards
⦁
put the thread guide into the notch 4 of the hook race cover
⦁ insert the bobbin case and press in the center until it clicks into place
⦁
pull the thread to the right under the spring 2
⦁ lead the thread beneath the thread guide and pull upwards
►
the thread is threaded in the guide
⦁ pull the thread
►
the bobbin must turn counterclockwise
3
4
5
4
1
2
2
1
removing the bobbin from the bobbin case
⦁ press the release lever at the bobbin case (see illustration «Changing
bobbin case» on this page)
034247.71.04_2014-02_Manual_B750_EN