manualshive.com logo in svg

Bernina 750 QE, User Manual

Share
Download
Bernina 750 QE User Manual Download Page 106

105

BSR

1

2

Beeper (audio signal) activation/deactivation

 

⦁

touch «Setup»-button 

 

⦁

touch «Audio setting»-icon

Selecting sound for BSr in the Setup program 

 

►

one sound is set as default (active)

 

⦁

touch the icon 

1 

showing the loudspeaker for BSR 

 

►

the loudpseaker is highlighted in red

 

►

the sound for the beeper is inactive

The loudspeaker is gray when the sound for the Beeper is active.

Selecting sound for BSr in the «BSr»-display 

 

⦁

touch the icon with the loudspeaker

 

►

the loudspeaker is highlighted in red

 

►

the sound for the beeper is inactive

The icon with the loudspeaker is gray and yellow-framed when the sound for 

the Beeper is active.

The sound selection icon 

2

 is only visible if the sounds are turned on 

in the Setup Program.

034247.71.04_2014-02_Manual_B750_EN

Summary of Contents for 750 QE







































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands