Bernina 750 QE User Manual Download Page 119

Page: 119 / 198

118

Combi mode

correcting a stitch pattern combination

Inserting a stitch pattern

⦁

select the desired position in the combination

⦁

select the new stitch pattern

►

the new stitch pattern is inserted below the selected stitch pattern

To insert a stitch pattern at the beginning of a combination the cursor must be

positioned above the

first

stitch pattern.

altering stitch patterns

⦁

select the desired stitch pattern in the combination

⦁

touch «i»-icon

⦁

select desired function, e.g. Mirror image left/right

►

the stitch pattern is mirrored left/right

⦁

touch «Back»-icon

The alterations always affect the stitch above the cursor. Saved

stitch combinations can be altered or corrected in the same way. To

make corrections and alterations permanent, the combination must

be saved again afterwards.

034247.71.04_2014-02_Manual_B750_EN

Summary of Contents for 750 QE







































































































































































































Search results

Summary of Contents for 750 QE

Reviews:

Brands by name

Popular brands

Bernina 750 QE, User Manual

Search results

Summary of Contents for 750 QE

Reviews:

Brands by name

Popular brands