Bernina 750 QE User Manual Download Page 153

Page: 153 / 198

152

Embroidery motifs

⦁

touch «i»-icon

Width and height of the embroidery motif is displayed in millimeters (mm). The

embroidery time is displayed in minutes.

Motif size and embroidery time

►

the view of the motif is enlarged by one step

⦁

touch «i»-icon

⦁

touch «Zoom+»-icon 1-5x

Zoom

⦁

touch «Zoom-»-icon 1-5x

►

the enlarged view of the motif is scaled-down by one step

Icon inactive:

⦁

the position of the motif can be moved to any position

within

the hoop

directly in the Display by using the finger

Icon active (yellow-framed):

⦁

the view of the motif can be moved to any position the hoop directly in the

Display by using the finger

►

the embroider position is not changed

Moving the Motif

⦁

touch «Move»-icon

034247.71.04_2014-02_Manual_B750_EN

Summary of Contents for 750 QE







































































































































































































Search results

Summary of Contents for 750 QE

Reviews:

Brands by name

Popular brands

Bernina 750 QE, User Manual

Search results

Summary of Contents for 750 QE

Reviews:

Brands by name

Popular brands