Bernina 750 QE, User Manual

Page: 25 / 198

24
Sewing preparation
thread needle
Position the needle by pressing the foot control once (1 stitch).
⦁
raise the needle
⦁ lower the presser foot
⦁ turn power switch to «0» (off)
⦁ hold thread to the left and back
⦁ press lever 1 down and hold it
⦁ guide thread around the hook 2 to the right in front of the needle
⦁
put the thread from the front into the guide 3 until it catches in the wire hook
⦁ release lever 1 and thread
►
needle is threaded
⦁ pull the thread to the back and
⦁ put the thread under the foot and pull it from back to front over the thread
cutter on left side of the head frame 4 , cut
Threads release automatically as soon as the first stitch is sewn.
changing the presser foot
removing the presser foot
⦁ raise the needle and presser foot
⦁
turn power switch to «0» (off)
⦁ raise the clamping lever 1
⦁ remove the presser foot
attaching the presser foot
⦁
guide the presser foot upwards over the cone
⦁ press the clamping lever 1 down
4
2
3
1
1
1
1
034247.71.04_2014-02_Manual_B750_EN