Bernina 750 QE User Manual Download Page 111

Page: 111 / 198

110

Alphabets

⦁

touch «Combi mode»-icon

⦁

touch the icon with the desired letter

►

the letter appears in the Stitch altering area

►

the cursor is below the letter

Selecting the next letter

⦁

touch the required icon

►

the next letter appears in the Stitch altering area etc.

correcting the combination

Inserting lettering

A letter is always inserted above the cursor.

Inserting an additional letter at the beginning of a pattern combination:

⦁

move the cursor up by using the arrow icons

Activating desired place:

⦁

select or scroll to required letter in the Stitch altering area

⦁

select new letter

►

letter is inserted above cursor

Deleting Letters

A letter is always deleted above the cursor.

Activating desired place:

⦁

select or scroll to the required letter in the Stitch altering area

⦁

touch «Delete»-icon

►

letter is deleted

Saving and deleting combinations see page

116, 120

Individual letters and rows of the same letter of the same alphabet are sewn in

single mode.

Letters for names, addresses, words, etc. are combined and sewn in combi

mode.

combining lettering

034247.71.04_2014-02_Manual_B750_EN

Summary of Contents for 750 QE







































































































































































































Search results

Summary of Contents for 750 QE

Reviews:

Brands by name

Popular brands

Bernina 750 QE, User Manual

Search results

Summary of Contents for 750 QE

Reviews:

Brands by name

Popular brands