17
Monitoring
When no button is pressed in the controller’s keyboard for
3 minutes, the controller moves to the main monitoring screen
indicated by the word AUTO in the middle of the screen.
The AUTO screen displays the current status of the controller,
which includes the current time and day, as well as the opened
valve indication and its remaining operation time or volume.
During a fault or malfunction mode the relevant fault message
overrides the AUTO screen data, see the faults table below.
To cancel the fault check the system for the cause of the fault,
repair the necessary components and then press the
and
the buttons simultaneously for 2 seconds.
Please note:
■
When a fault message is displayed on the AUTO screen moving
to the other screens is not possible.
■
In case the controller has more than one fault, this screen
alternates the current fault messages every few seconds.
Fault Messages Table
Type
Display Operation stopped at: Remarks
Low Battery
"AL:bt"
All Valves (!)
"OFF" icon is lit
Too High
Current
Usage
"AL:Cr"
The faulty valve only
The valve's
number icon is lit
High Flow
"AL:HF" The faulty valve only
The valve's
number icon is lit
Timer
Override
"AL:tr"
All Valves (!)
Automatically canceled
at midnight
